MFJ 58B

PVC Cross Loop Antenna Kit

 
Omschrijving
Excl btw
Incl btw
Per
Aantal
 
MFJ 58B
Art. 3043365
Excl btw € 52,89
Incl btw € 64,00
Per 1 St.
Alle prijzen zijn excl. verzendkosten

De MFJ-58B PVC Cross Loop antenne bestaat uit een PVC Cross Mount dat in de houder op de loop tuner gestoken kan worden en dient als basis voor een kruisantenne. Voor de antenne worden 4 afgestemde draden meegeleverd. Met deze loop draden met een lengte van 4, 7, 13 en 28 ft. is de loop tuner geschikt voor het frequentiebereik van 5 - 29.7 MHz. De 28 ft loop draad is te lang voor de Cross Mount en moet aan andere bevestigingspunten worden opgehangen en is afhankelijk van de opstelling.

The 28-ft wire becomes an insulated 10-gauge flexible loop with low resistance lugs that operates on 60 and 40 meters. This loop is most efficient on 40 Meters, but can be tuned lower in frequency to 60 Meters with some efficiency loss depending on the loop shape, support, and environment. It can be clipped to a bookshelf, curtain or any other support that will allow the most convenient placement.

The 13-ft wire becomes an insulated 10-gauge flexible loop with low resistance lugs providing coverage on 30 and 20 Meters (10.100 - 14.350 MHz). The 13-ft wire works most efficiently on 20 Meters, but can be tuned to 30 Meters with some efficiency loss depending on the loop shape, support, and environment.

The 7-ft wire becomes an insulated 10-gauge flexible loop with low resistance lugs providing coverage on 20, 17, and 15 Meters (14.000 - 21.450 MHz). The 7-ft wire works most efficiently on 15 Meters, but can be tuned down to 20 Meters with some efficiency loss depending on the loop shape, support, and environment.

The 4-ft wire becomes an insulated 10-gauge flexible loop with low resistance lugs providing coverage on 17, 12, and 10 Meters (18.068 - 29.700 MHz). The 4-ft wire works most efficiently on 10 Meters, but can be tuned down to 17 Meters with some efficiency loss depending on the loop shape, support, and environment.

The PVC Cross Mount consists of 5 sections of ¾ inch PVC tubing that connect together in seconds using a PVC Cross Connector (two different base tubes are provided which optimizes the PVC Cross Mount size for the wires used). Three loops can be attached to the PVC Cross Mount using the loop support bands provided on the PVC sections.

When assembled, the cross measures approximately 4½ feet across and has a maximum height of 4½ feet. When disassembled and bundled together, the PVC sections only take up 2 inches x 2 inches x 26 inches of space.